Audio effects
Gain & Stereo
Level, mute, polarity, width, mono bass and channel utilities.
What it does
Level, mute, polarity, width, mono bass and channel utilities.
Add it to a track
Select the destination track, open Plugins, and choose Add Effect. Find this device in Library → Devices → Audio Effects. Effects process the signal from the devices before them in the chain.
Controls
| Control | What to listen or look for |
|---|---|
| Gain | Sets the signal level leaving this stage. |
| Mute | Silences this signal path. |
| Ø L | Reverses the polarity of the signal; the left-channel control affects only the left side. |
| Ø R | Reverses the polarity of the right channel. |
| Channel | Chooses stereo, one channel only, or swapped left and right channels. |
| Width | Adjusts the difference between the left and right channels to change stereo width. |
| Mid/Side | Switches to mid/side processing of the center and stereo-difference signals. |
| Mono | Combines the left and right channels into a centered mono signal. |
| Bass Mono | Combines low frequencies into mono while preserving stereo above the bass cutoff. |
| Bass Freq | Sets the highest frequency included in Bass Mono processing. |
| Balance | Moves the signal balance between the left and right channels. |
| DC | Removes a constant DC offset from the signal. |
Work with this device
Start with a short passage that represents your material. Change one control at a time. Compare at a similar listening level, using the device's power control to bypass it. Save a version of the project before making a large change.
Guide for the macOS development build. For changes between versions, see update history. Public installers and final system requirements are not available yet.