Audio effects
Loop Recorder
Tempo-synced looper with overdub, reverse and speed.
In this guide
Add it to a track
Select the destination track, open Plugins, and choose Add Effect. Find this device in Library → Effects. Effects process the signal from the devices before them in the chain.
Controls
| Control | What to listen or look for |
|---|---|
| Length | Sets the duration of the captured loop. |
| Mode | Chooses how incoming audio is recorded into or played from the loop. |
| Reverse | Plays the processed material backwards. |
| Speed | Changes loop playback speed and its resulting pitch. |
| Feedback | Sets how much existing loop audio is retained during overdubbing. |
| Fade | Sets the smoothing at transitions to reduce abrupt changes and clicks. |
| Clear | Clears the captured loop content. |
| Output | Sets the signal level leaving this stage. |
| Mix | Blends the original signal with the processed signal; 100% gives only the processed sound. |
Work with this device
Start with a short passage that represents your material. Change one control at a time. Compare at a similar listening level, using the device's power control to bypass it. Save a version of the project before making a large change.
Dawnamite user guide for macOS. For changes between versions, see update history.