Audio effects
Simple Reverb
Simulates space and depth with reflections.
In this guide
Add it to a track
Select the destination track, open Plugins, and choose Add Effect. Find this device in Library → Effects. Effects process the signal from the devices before them in the chain.
Controls
| Control | What to listen or look for |
|---|---|
| Room-Size | Changes the apparent size of the resonant space. |
| Pre-Delay | Sets the gap between the original sound and the start of the reverb. |
| Damping | Reduces high-frequency energy as the sound decays, making the tail darker. |
| Filter | Darkens (left) or thins (right) the reverb only; the center is off. |
| Dry | Sets the level of the original, unprocessed signal. |
| Wet | Sets the level of the processed signal. |
| Long Pre-Delay | Sets the gap before the reverb begins, up to five seconds in extended mode. |
Work with this device
Start with a short passage that represents your material. Change one control at a time. Compare at a similar listening level, using the device's power control to bypass it. Save a version of the project before making a large change.
Current behavior
The Pre-Delay range selector can use the legacy range or an extended range up to 5 seconds. The displayed Pre-Delay label refers to the active stored parameter.
Dawnamite user guide for macOS. For changes between versions, see update history.